technical data sheet n 50 straight jack (7/8?r) 53K117-C05N1 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tole rances according to iso 2768 m-h interface according to iec 60169-16, mil-prf-39012, cecc 22210 documents assembly instruction 60 i 36 material and plating connector parts material plating center contact spring bronze silver, 3-6 m outer contact brass flash white bron ze over silver(e.g. optargen?) body brass flash white bronze over silver(e.g. optargen?) dielectric ptfe gasket silicone
technical data sheet n 50 straight jack (7/8?r) 53K117-C05N1 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 electrical data impedance 50 frequency dc to 11 ghz return loss 35 db, dc to 1 ghz 33 db, 1 to 2.7 ghz 26 db, 2,7 to 4 ghz insertion loss 0.05 db, dc to 4 ghz insulation resistance 5 x10 3 m center contact resistance 1 m outer contact resistance 0.25 m test voltage 2500 v rms working voltage 1400 v rms power handling (at 20 c, sea level, vswr 1.0) 1000 w @ 1 ghz 700 w @ 2 ghz rf-leakage 128 db up to 1 ghz intermodulation (3 rd order) -117 dbm @ 2 x 20 w - limitations are possible due to the used cable type - mechanical data mating cycles min. 500 center contact captivation: axial 28 n radial 3 ncm coupling test torque max. 1.7 nm recommended torque 0.7 nm to 1.1 nm environmental data temperature range -45c to +85c thermal shock mil-std-202, meth. 107, cond. b corrosion mil-std-202, meth. 101, cond. b vibration mil-std-202, meth. 204, cond. b shock mil-std-202, meth. 213, cond. i moisture resistance mil-std-202, meth. 106 degree of protection (unmated condition) iec 60529, ip68 2.5 bar 2002/95/ec (rohs) compliant tooling n/a suitable cables rosenbergerslink tm 7/8?r (recommended) leoni flexline 7/8? r rfs lcf 78-50 andrew ldf 5-50 packing standard 1 pce in bag weight x.xx g/pce draft date approved date rev. engineering change number name date a. fellner 18/01/08 wengler 24.06.08 300 08-v180 tobias stadler 03.06.08 while the information has been carefully compiled to the best of our knowled g e, nothin g is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infrin g e existin g patents. in the effort to improve our products, we reserve the right to make changes judged to be necessary.
|